Using, Creating and Editing Voices
Voice Creating (Voice Set)
CGP-1000 Owner’s Manual
102
EGThe EG (Envelope Generator) settings determine how the level of the sound changes in time. This lets you reproduce many sound characteristics of natural acoustic instruments—such as the quick attack and decay of percussion sounds, or the long release of a sustained piano tone. VIBRATOEFFECT/EQ1. REVERB DEPTH/CHORUS DEPTH/DSP DEPTH
ATTACK Determines how quickly the sound reaches its maximum level after
the key is played. The lower the value, the quicker the attack.
DECAY Determines how quickly the sound reaches its sustain level (a
slightly lower level than maximum). The lower the value, the
quicker the decay.
RELEASE Determines how quickly the sound decays to silence after the key is
released. The lower the value, the quicker the decay.
Level
Sustain level
Time
Key on Key off
ATTACK DECAY RELEASE
Vibrato:
A quavering, vibrating sound
effect that is produced by regu-
larly modulating the pitch of the
Voice.
DEPTH Determines the intensity of the Vibrato effect. Higher settings result
in a more pronounced Vibrato.
SPEED Determines the speed of the Vibrato effect.
DELAY Determines the amount of time that elapses between the playing of
a key and the start of the Vibrato effect. Higher settings increase the
delay of the Vibrato onset.
Pitch
Time
SPEED
DEPTH
DELAY
Switching the VIBE ROTOR
on/off with a pedal
You can use a pedal to switch the
VIBE ROTOR on/off (when the
VIBE ROTOR ON/OFF function
is properly assigned; page 191).
REVERB DEPTH Adjusts the reverb (page 93) depth.
CHORUS DEPTH Adjusts the chorus (page 93) depth.
DSP DEPTH Adjusts the DSP (page 93) depth.
If you want to re-select the DSP type, you can do so in the DSP
menu explained on page 103.
DSP ON/OFF Determines whether the DSP is on or off.
VIBE ROTOR This will be displayed only if VIBE VIBRATE is selected for the DSP
Type parameter explained on page 93. Determines whether VIBE
VIBRATE should be set to on or off when selecting the Voice.