Using a Microphone
Adjusting the Microphone and Harmony Sound
CGP-1000 Owner’s Manual
170
Adjusting the Microphone and Har-mony Sound
1Call up the operation display.

[FUNCTION] [G] MIC SETTING/VOCAL HARMONY

2Press the [I] (MIC SETTING) button to call up the MICROPHONE SET-

TING display.

HARMONY1/2/3 VOLUME Sets the volume of the first (lowest), second, and third (highest)
harmony notes.
HARMONY1/2/3 PAN Specifies the stereo (pan) position of the first (lowest), second,
and third (highest) harmony notes.
Random
The stereo position of the sound will change randomly when-
ever the keyboard is played. This is effective when the Har-
mony mode (page 173) is set to “VOCODER” or “CHORDAL.”
L63>R – C – L<R63
A setting of L63>R pans the sound hard left, while C is at cen-
ter, and L<R63 is at hard right.
HARMONY1/2/3 DETUNE Detunes the first (lowest), second, and third (highest) harmony
notes by the specified number of cents.
PITCH TO NOTE When this is set to “ON,” you can “play” the voices of the instru-
ment with your voice. (The instrument tracks the pitch of your
voice and converts it to note data for the tone generator. Keep in
mind, however, that dynamic changes in your voice do not affect
the volume of the tone generator.)
PITCH TO NOTE PART Determines which of the instrument parts will be controlled by
the lead vocal when the Pitch to Note parameter is “ON.”
2