Yamaha CGP-1000 Editing the Volume and Tonal Balance (MIXING CONSOLE)

Using, Creating and Editing Voices

Editing the Volume and Tonal Balance (MIXING CONSOLE)

CGP-1000 Owner’s Manual

●Multi Assign Type

Multi Assign effect automatically assigns notes played simultaneously in the right-hand

section of the keyboard to separate parts (Voices). Both of the keyboard part [RIGHT

1] and [RIGHT 2] should be turned on when using the Multi Assign effect. The Right 1

and Right 2 Voices are alternately assigned to the notes in the order you play.

●Echo Types

When one of the Echo Types is selected, the corresponding effect (echo, tremolo, trill) is

applied to the note played in the right-hand section of the keyboard in time with the cur-

rently set tempo, regardless of the [ACMP ON/OFF] and the LEFT part on/off status. Keep

in mind that Trill works when you hold down two notes on the keyboard simultaneously

(last two notes if more than two notes are held), and it plays those notes alternately.

Editing the Volume and Tonal Balance (MIXING CONSOLE)

The Mixing Console gives you intuitive control over aspects of the keyboard parts

and Song/Style channels, including volume balance and the timbre of the sounds.

It lets you adjust the levels and stereo position (pan) of each Voice to set the opti-

mum balance and stereo image, and lets you set how the effects are applied.

1Press the [MIXING CONSOLE] button to call up the MIXING CON-

SOLE display.

VOLUME

This parameter is available for all types with the exception of “Multi Assign.” It determines

the level of the harmony/echo notes generated by the Harmony/Echo effect.

SPEED This parameter is only available when Echo, Tremolo, or Trill is selected in Type

above. It determines the speed of the Echo, Tremolo, and Trill effects.

ASSIGN

This parameter is available for all types with the exception of “Multi Assign.” This lets

you determine the keyboard part via which the harmony/echo notes will be sounded.

CHORD

NOTE

ONLY

This parameter is available when one of the Harmony Types is selected. When this is set to

“ON,” the Harmony effect is applied only to the note (played in the right-hand section of

the keyboard) that belongs to a chord played in the chord section of the keyboard.

TOUCH

LIMIT

This parameter is available for all types with the exception of “Multi Assign.” It determines

the lowest velocity value at which the harmony note will sound. This allows you to selec-

tively apply the harmony by your playing strength, letting you create harmony accents in the

melody. The harmony effect is applied when you play the key strongly (above the set value).