Appendix
CGP-1000 Owner’s Manual
210

Removing the CGP-1000 from its Case and Assembling the Unit

CAUTION
• Be careful not to confuse parts, and be sure to install all parts in the correct orientation. Please assemble in accordance with
the sequence given below.
• Assembly should be carried out by at least four persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws can damage the instrument.
• Be sure to tighten all screws upon completing the assembly of each unit.
•To disassemble, reverse the assembly sequence given below.
1Remove the parts shown below from the box. 2Remove the brackets
Unscrew the brackets.
3Attach the right front and rear legs.
1Attach and securely tighten the right front leg with
the 70mm hexagon bolts.
2Attach and securely tighten the rear leg with the
92mm hexagon bolts.
Have a Phillips (+) screwdriver and a hexagonal wrench ready.
1
2
3
5
4
6
1Cut the bands.
2Remove the top cover.
3Remove the front screws.
4Remove the side screws.
5Pull off the cover.
6Remove the parts.
Leg × 3
70mm hexagon bolt × 4
92mm hexagon bolt × 2
Pedal
4.0 × 20mm screw × 4
Pedal brace rod × 2
AC power cord