Yamaha CLP-320 Setting the Volume, Using Headphones, Using the Headphone Hanger

ENGLISH

Before Using

Setting the Volume

When you start playing, adjust the [MASTER VOLUME] control to the most comfortable listening level.

The level decreases.

The level increases.

CAUTION

Do not use this instrument at a high volume level for a long period of time, or your hearing may be damaged.

Using Headphones

Connect a pair of headphones to one of the [PHONES] jacks. Two [PHONES] jacks are provided.

You can connect two sets of standard stereo headphones. (If you are using only one pair of headphones, you can plug them into either jack.)

CAUTION

Do not listen to the instrument at a high volume level through headphones for a long period of time, or your hearing may be damaged.

Bottom of the keyboard

PHONES

Standard stereo phone plug

Using the Headphone Hanger

A headphone hanger is included in the package so that you can hang the headphones on this instrument. Install the headphone hanger using the included two screws (4 ⋅ 10mm) as shown in the ﬁgure.

CAUTION

Do not hang anything other than the headphones on the hanger. Otherwise, this instrument or the hanger may be damaged.

12

14CLP-320Owner’s Manual

Contents

Page Introduction SPECIAL MESSAGE SECTION ENGLISH IMPORTANT NOTICE: ENVIRONMENTAL ISSUES: Battery Notice: IMPORTANT SAFETY INSTRUCTIONS Power supply/Power cord Do not open Assembly Connections Maintenance Handling caution Using the bench (If included) Saving data Owner’s Manual (this book) Quick Operation Guide (separate sheet) Data List Trademarks: Tuning Transporting AWM Dynamic Stereo Sampling GH(Graded Hammer) keyboard Features Part Names and Functions Before Using Listening to Songs Loaded from the Computer [PHONES] [POWER] [DEMO/SONG] [METRONOME] [REC] [PEDAL] [AC IN] MIDI[IN/OUT] Pedals Key Cover To open the key cover: To close the key cover: Music Rest To raise the music rest: Connecting the Power Cord Turning the Power On Setting the Volume Using Headphones 1. Turn on the power 2. Start playing back a demo song 3. Select and play a demo song 4. Stop the Voice demo 1. Select and play back a piano preset song. 2. Stop playback Select and play back a song Selecting Voices Using the Pedals Adding Variations to the Sound – Reverb Layering Two Voices (Dual mode) 1. Engage Dual mode 2. Exit Dual mode and return to normal play mode Transposition Fine-tuningthe Pitch Using the Metronome 1. Start the metronome 2. Stop the metronome Adjusting the Keyboard Touch (Touch Sensitivity) Audio recording and data recording 1. Select a voice and other settings for the recording 2. Engage Record mode 3. Start recording 4. Stop recording Playing Back Recorded Performance Data 1. Start the playback 2. Stop the playback Erasing Recorded Performance Data 1. Engage Record mode About MIDI MIDI’s Capability An example of connecting this instrument to the USB port on a computer Connecting this instrument to the computer using a USB-MIDIinterface MIDI Transmit/Receive Channel Selection Local Control ON/OFF Program Change ON/OFF Control Change ON/OFF Loading Song Data from a Computer to the Clavinova Transmitting Song Data from the Clavinova to a Computer Backing up Data and Initializing the Settings Backing up data to ﬂash memory Initializing the settings BC-100Bench UX16 HPE-160 1. Attach (ﬁnger-tighten)C to D and E 2. Attach B 3. Securely tighten the screws on C that were attached in Step 4. Mount A 5. Secure A 6. Connect the pedal cord 7. Connect the power cord to the unit Voltage Selector 8. Set the adjuster 9. Attach the headphone hanger After completing the assembly, please check the following Symbols Numerics Page Page Page FCC INFORMATION (U.S.A.) NORTH AMERICA ASIA CENTRAL & SOUTH AMERICA EUROPE AFRICA