Yamaha CLP-320 BC-100Bench, UX16, HPE-160

Troubleshooting

Troubleshooting

	Problem	Possible Cause and Solution

	This instrument does not turn on.	This instrument has not been plugged in properly. Securely insert the female plug into
		the socket on this instrument, and the male plug into a proper AC outlet (page 13).

	Noise from the speakers or headphones is	The noise may be due to interference caused by the use of a mobile phone in close
	audible.	proximity to this instrument. Turn off the mobile phone, or move it further away from
		this instrument.

	The overall volume is low, or no sound is	• The Master Volume is set too low. Set it to an appropriate level using the [MASTER
	heard.	VOLUME] control.
		• Make sure a pair of headphones is not connected to the headphones jack.
		• Make sure that Local Control (page 29) is ON.	ENGLISH

	The damper pedal has no effect.	The pedal cord may not be properly connected. Make sure to securely insert the pedal
	The damper pedal has no effect.
		cord into the [PEDAL] jack (page 36).

Options

BC-100 Bench

A comfortable bench styled to match your Yamaha Clavinova.

UX16

USB-MIDI interface

HPE-160

Headphones

31

CLP-320Owner’s Manual 33

Contents

Page Introduction SPECIAL MESSAGE SECTION ENGLISH IMPORTANT NOTICE: ENVIRONMENTAL ISSUES: Battery Notice: IMPORTANT SAFETY INSTRUCTIONS Power supply/Power cord Do not open Assembly Connections Maintenance Handling caution Using the bench (If included) Saving data Owner’s Manual (this book) Quick Operation Guide (separate sheet) Data List Trademarks: Tuning Transporting AWM Dynamic Stereo Sampling GH(Graded Hammer) keyboard Features Part Names and Functions Before Using Listening to Songs Loaded from the Computer [PHONES] [POWER] [DEMO/SONG] [METRONOME] [REC] [PEDAL] [AC IN] MIDI[IN/OUT] Pedals Key Cover To open the key cover: To close the key cover: Music Rest To raise the music rest: Connecting the Power Cord Turning the Power On Setting the Volume Using Headphones 1. Turn on the power 2. Start playing back a demo song 3. Select and play a demo song 4. Stop the Voice demo 1. Select and play back a piano preset song. 2. Stop playback Select and play back a song Selecting Voices Using the Pedals Adding Variations to the Sound – Reverb Layering Two Voices (Dual mode) 1. Engage Dual mode 2. Exit Dual mode and return to normal play mode Transposition Fine-tuningthe Pitch Using the Metronome 1. Start the metronome 2. Stop the metronome Adjusting the Keyboard Touch (Touch Sensitivity) Audio recording and data recording 1. Select a voice and other settings for the recording 2. Engage Record mode 3. Start recording 4. Stop recording Playing Back Recorded Performance Data 1. Start the playback 2. Stop the playback Erasing Recorded Performance Data 1. Engage Record mode About MIDI MIDI’s Capability An example of connecting this instrument to the USB port on a computer Connecting this instrument to the computer using a USB-MIDIinterface MIDI Transmit/Receive Channel Selection Local Control ON/OFF Program Change ON/OFF Control Change ON/OFF Loading Song Data from a Computer to the Clavinova Transmitting Song Data from the Clavinova to a Computer Backing up Data and Initializing the Settings Backing up data to ﬂash memory Initializing the settings BC-100Bench UX16 HPE-160 1. Attach (ﬁnger-tighten)C to D and E 2. Attach B 3. Securely tighten the screws on C that were attached in Step 4. Mount A 5. Secure A 6. Connect the pedal cord 7. Connect the power cord to the unit Voltage Selector 8. Set the adjuster 9. Attach the headphone hanger After completing the assembly, please check the following Symbols Numerics Page Page Page FCC INFORMATION (U.S.A.) NORTH AMERICA ASIA CENTRAL & SOUTH AMERICA EUROPE AFRICA