Split Point Settings
CVP-409/407 Owner’s Manual 111
Using, Creating and Editing the Auto Accompaniment Styles
Tempo
This determines whether the tempo changes or not when you change Styles dur-
ing Style playback.
HOLD ................The tempo setting of the previous Style is maintained.
RESET.................The tempo changes to that of the initial default tempo for the
selected Style.
Part On/Off
This determines whether the Style Channel On/Off status changes or not when
you change Styles during Style playback.
HOLD ................. The Style Channel On/Off status of the previous Style is maintained.
RESET.................All Style Channels are set to On.
Split Point Settings
These are the settings (there are two Split Points) that separate the different sec-
tions of the keyboard: the Chord section, the LEFT part section and the RIGHT 1
and 2 section. The two Split Point settings (below) are specified as note names.
1Call up the operation display.
[FUNCTION] → [C] STYLE SETTING/SPLIT POINT/CHORD
FINGERING → TAB [
√
][
®
] SPLIT POINT
2Use the [F]–[H] buttons to set the Split Point (see below).
•Split Point (S)— separates the Chord section for Style playback from the
section(s) for playing Voices (RIGHT 1, 2 and LEFT)
•Split Point (L)— separates the two sections for playing Voices, LEFT and
RIGHT 1– 2.
These two settings can be set to the same note (as in the default) or two different
notes as desired.
Split Point (L) cannot be set lower than Split Point (S), and Split Point (S) cannot be
set higher than Split Point (L).
Specifying the Split Point by
note name
Press the [1
π†
]–[4
π†
] but-
tons. You can specify the Split
Point of the Voice and chord sec-
tion of the keyboard by using
STYLE in the display, and you can
specify the Split Point of the left
and right Voices by using LEFT.
Voice RIGHT 1and 2
Split Point (S+L)
Chord section +
Voice LEFT
Press the [F] (S+L) button and rotate the [DATA ENTRY] dial.
Press the [H] (S) button or the [G] (L) button and rotate the [DATA ENTRY] dial.
Split Point (S) Split Point (L)
Chord section Voice LEFT Voice RIGHT 1and 2
Setting the Split Point (S) and the Split Point (L) to the same note
Setting the Split Point (S) and the Split Point (L) to different notes