Internal Design of the CP5 & CP50
Reference
Left & Right Parts
[VOICE]
[PRE-AMP]
[MOD-FX]
[PWR-AMP] (CP5 only)
[LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
[COMMON]
Song Setting Area
[SONG SETTING]
[RECORD]
TRACK Part
[TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
Settings for All Parts
[REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
[UTILITY]
[FILE]
Appendix

18 CP5/CP50 Reference Manual

For non-piano voices:

In the case of non-piano voices, effects can be selected from the categories that make up the Other

group as described above. In addition, the modulation effects, which are primarily for PIANO and

E.PIANO voices, are grouped together in the MOD category. For more details regarding these

effects, see For PIANO and E.PIANO voices (page 15). All effects for non-piano voices function as

insertion effects.

Configuring Modulation Effect Block Parameters

Each Modulation Block effect is configured using a different set of parameters, which adjust the

sound of the effect in various ways. The following tables will describe the functions of each of these

parameters in alphabetic order, first for the modulation effects (specially designed for PIANO and

E.PIANO voices) and then for the effects from the Other group.

NOTE For more details on the specific parameters associated with each different type of effect, see the Modulation Effect
parameter list in the Data List pdf document.

Parameters for modulation effects

Edit Sequence Press and hold the [MOD FX] button (for at least one second) Navigate to the second

and subsequent pages using the [ PAGE] and [PAGE ] buttons Turn Knobs 1 to 3

On-screen name
(and full name) Associated effects Description
BBottom Touch Wah and Pedal Wah This parameter is used to set the lowest point
in the filter's sweep range.
CColor Small Phaser This parameter is used to adjust the way in
which the phaser sweeps.
DDelay Symphonic This parameter is used to set an offset for the
modulation delay time.
Depth Flanger, Chorus, 816Chorus, and
Symphonic
This parameter is used to adjust the depth of
modulation.
Drive Small Phaser and Max90 This parameter is used to set the phaser's
input level.
Touch Wah and Pedal Wah This parameter is used to adjust the way in
which the sound distorts.
FFeedback Flanger and 816Chorus This parameter is used adjust the degree to
which output from the effect is fed back into
its input.
MManual Flanger This parameter is used to set the offset value
for delay modulation.
Mix Flanger, Chorus, 816Chorus, and
Symphonic
This parameter is used to adjust the volume
of the wet sound (i.e., the sound produced by
the effect).
Mode Max100 This parameter is used to select the phaser
mode.
PPdlCtrl
(Pedal Control)
Pedal Wah This parameter is used to set the cutoff fre-
quency for the wah filter.
Phase 816Chorus This paramete r is used to set the phase offset
for the chorus effect.
Effect category
Effect name