Internal Design of the CP5 & CP50
Reference
Left & Right Parts
[VOICE]
[PRE-AMP]
[MOD-FX]
[PWR-AMP] (CP5 only)
[LEFT1]/[LEFT2]/[RIGHT1]/
[RIGHT2] (CP5)
[LEFT]/[RIGHT] (CP50)
[COMMON]
Song Setting Area
[SONG SETTING]
[RECORD]
TRACK Part
[TRACK]
MIC INPUT Part
[MIC INPUT] (CP5 only)
Settings for All Parts
[REVERB]
Settings for All Performances
[MASTER COMPRESSOR]
[UTILITY]
[FILE]
Appendix

53 CP5/CP50 Reference Manual

If Typ e has been set to “SMF”:

Rename

The parameters to be set on the Rename screen are as follows.

Delete

The parameters to be set on the Delete screen are as follows.

On-screen name

(and full name) Description
Dst (Destination) This parameter is used to select a User Song number (1 to 128) to hold the loaded
data.

On-screen name

(and full name) Description

Type This field displays the type of file to be renamed. Only All files can be remained, and therefore,
this setting cannot be changed. Press the [ENTER] button to proceed to the next page. To
return to Page 1 of the File screen without renaming data, press the [EXIT] button. If no All file
is present in the root directory of the USB flash-memory device plugged into your CP5 or
CP50, it will not be possible to proceed to the next page using the [ENTER] button.
File This parameter is used to select the file to be renamed.
When you have selected the required file, press the [ENTER] button. To return to the File page
without loading any data, press either Knob 3 (NO [PUSH]) or the [EXIT] button.
Name This parameter is used to specify a new name for the selected file. You can turn Knob 1 (Cur-
sor) to move the cursor within the displayed name. Then, using Knob 2 (Data), you can
change the character at the cursor position. File names can contain upper case letters, num-
bers, and symbols. When you have specified a new name, press the [ENTER] button to com-
plete the renaming process. Alternatively, you can press the [EXIT] button to return to the File
page.

On-screen name

(and full name) Description

Type This field displays the type of file to be deleted. Only All files can be deleted, and therefore,
this setting cannot be changed. To proceed to the next page, press the [ENTER] button. Alter-
natively, you can press the [EXIT] button to return to Page 2 of the File screen. If no All file is
present in the root directory of the USB flash-memory device plugged into your CP5 or CP50,
it will not be possible to proceed to the next page using the [ENTER] button.
File This parameter is used to select the file to be deleted.
When you press the [ENTER] button, you will be asked to confirm that you wish to proceed.
Press either Knob 1 (YES [PUSH]) or the [ENTER] button to delete the data, or press either
Knob 3 (NO [PUSH]) or the [EXIT] button to return to the File page.