4.6. Verifying the Hardware InstallationAfter connecting the CRW2100FXZ drive to the computer (or an IEEE daisy-chain or tree), you can verify that the drive is correctly recognized from your computer.
4.6.1. Windows Users
Make sure that the CRW2100FXZ is recognized by the operating system. From the Windows 98 Second Edition’s [Start] menu, select [Settings]-[Control Panels] and open the [System] control panel. In the [System Properties] window, select the [Device Manager] tab. If you can find a new CD drive icon (YAMAHA CRW2100E), an IEEE1394 bus controller icon, and an SBP2 icon as shown below, you have successfully installed both the drive and the IEEE1394 interface card as Windows OS recognizes both devices.This screen shot is from Windows 98 Second Edition.
Important Note: For more information about how to use the operating system, refer to the documentation that came with it.
Imortant note: If there is a mark next to the icon for the CRW2100FXZ drive or the IEEE1394 bus controller, this means that it has not been installed correctly. In either case, the CRW2100FXZ drive may not work properly.
Important Note: For Windows 2000, double-click [System] in the [Control Panels], select the [Hardware] tab, and click the [Device Manager] button in [System Properties].