Setup Procedures
3Turn on the CRW2200SX drive first, then the computer.
When the power of the CRW2200SX drive is turned on, the power LED on the front panel lights up in green.
Power LED
LED
Note
When you turn on the CRW2200SX drive, make sure the LED on the front panel blinks in green, which indicates that it is reading disc information. (→P. 31)
Always turn on the devices in the SCSI chain before turning on the computer. This will ensure that they are recognized by the computer’s operating system.
Do not disconnect any devices in the SCSI chain while the computer is on.
17
