Troubleshooting

The drive ejects or fails to read the disc, or the LED on the front panel remains lit in orange after the disc has been loaded (meaning that the disc has not been recognized). (→P. 31)

●Shut down the computer. Then disconnect the SCSI cable from the drive but leave the AC adapter connected. Now try loading the disc.

●There may be problems with the disc itself. If the drive fails to recognize a variety of discs including audio CDs, CD-ROMs, and blank CD-R/RW discs (the LED on the front panel remains lit in orange after a disc has been inserted), you should contact your nearest Yamaha dealer.

No sound of CD-DA (audio CD) disc is audible.

●Check that the LINE OUT jacks (L/R) of the CRW2200SX drive is connected correctly to the sound card or amplified speakers. (→P. 10)

●For users with Windows Me, no sound is audible from headphones connected to the headphone jack of the CRW2200SX drive or from powered speakers connected to the LINE OUT jacks (L/R) on the rear panel of the CRW2200SX drive. Make sure settings are as shown below.

(When you are using Windows Media Player 7.0 with Windows Me, the above symptom is known to exist because the default setting is set to ON for “Digital playback.”)

1 The “Properties” setting of the CRW2200SX drive.

➀Open the “YAMAHA CRW2200S Properties” window and click on the “Properties” tab.

➁Uncheck the “Enable digital CD audio for this CD-ROM device.” check box.

26