Yamaha CRW4001t Ejecting the Disc

Chapter 3 - Operation

Ejecting the Disc

If the CRW4001t is powered on:

Press the eject button to eject the disc.

Note: You cannot eject the disc if the ATAPI command prohibits the eject operation while the CRW4001t is reading data.

Caution: Be sure to remove the disc after it is completely ejected. (Trying to remove the disc before it is completely ejected may cause the drive to malfunction.)

Press the eject button

	READ/
ON/	WRITE
DISC

Recordable

VOL

If the CRW4001t is not powered on:

Pressing the eject button will not eject the disc.