Chapter 2 - Touring Around CRW4416SX

7Eject button

This button is used to open or close the tray.

8POWER switch

This is the main power switch. Use it to power CRW4416SX on and off. CRW4416SX and any other devices connected to the SCSI chain must be powered on before the host computer is powered on.

Rear Panel

5

 

SCSI-1

 

 

SCSI-2

 

AC I N

 

 

CDR ID

LINE OUT

R

L

 

1

TERMINATOR

 

 

 

 

OFF ON

 

1

2

3

4

1AC IN

Connect the included power cable here.

2CDR ID

Use this switch to set a unique SCSI ID number for the CRW4416SX.

3TERMINATOR

This switch is used to set termination. Refer to the terminator setting section for details.

4LINE OUT (L, R)

These jacks are used to output audio to the amplifier.

5SCSI-1, SCSI-2

These connectors are used to connect the CRW4416SX in the SCSI daisy chain.

6