Chapter 3 - Installing the Yamaha CRW4416SX Drive
Cable Connection
Power cable
Insert the power cable securely to the “AC IN” connector on the rear panel.
AC I N
CDR ID | LINE OUT | |
R | L | |
1
SCSI cable
TERMINATOR
OFF ON
Connect the SCSI cable to either of the CRW4416SX rear panel SCSI connectors (1) or (2), and connect the other end of the SCSI cable to the host computer.
The CRW4416SX is not supplied with a SCSI cable. You will need to obtain one that will fit the drive and the host computer connectors.
AC I N
CDR ID | LINE OUT | |
R | L | |
To the next SCSI device: host computer, hard disk drive, etc.
1
TERMINATOR
OFF ON
9