113
CVP-201
CSelect the Song Record mode...............................................................
Press the [REC] button.
The [REC] lamp lights and the QUICK RECORD display (Record
mode page 1) appears.
Call up page 1 by using the PAGE [<] and [>] buttons if the lamp
is lit but the QUICK RECORD display is not shown.
Once you have entered the Record Mode, you can press [REC] or
[EXIT] at any time before step 6 to cancel recording without saving any data.
The song number for recording can be
changed in the QUICK RECORD display.
If the Auto Accompaniment is turned on
when you enter the Record mode, the
ACMP&RHY track will automatically be
set to REC.
VSelect the part to be recorded. ........................................................
In Quick Recording, three parts can be recorded: the right hand part
(1/RIGHT), the left hand part (2/LEFT) and the Auto Accompaniment
& rhythm part (ACMP&RHY). Press the appropriate button — 1/
RIGHT, 2/LEFT or ACMP&RHY — to set the corresponding part to
REC (recording enabled) or OFF (recording/playback disabled). The
PLAY (playback) setting can be selected only for parts which already
contain data.
The ACMP&RHY part can be set to REC automatically by pressing
the panel [ACMP ON] button. To record only the rhythm, leave
ACMP&RHY set to REC, then press the [ACMP ON] button so that
the lamp goes out.
Both 1/RIGHT and 2/LEFT cannot be set to
REC at the same time.
Recording the Harmony Parts
The Clavinova will record harmony notes
when you record with the Harmony function
(page 69) turned on. If the harmony type is
set to Duet, Trio, Block, 4 Part, Country,
Octave, or 1+5, the harmony notes will be
recorded in the selected track. When any
other harmony type is selected, the harmony
notes will be recorded in tracks 6 through 8.
Recording in Dual/Split Mode
If you record the 1/RIGHT part in the Dual
mode, data is recorded to tracks 1 and 3.
If you record the 1/RIGHT part in the Split
mode, data is recorded to tracks 1 and 5.
If you record the 2/LEFT part in the Dual
mode, data is recorded to tracks 2 and 4.
If you record the 2/LEFT part in the Split
mode, data is recorded to tracks 2 and 5.
When the recording part is changed,
[HARMONY] and [SPLIT] are automati-
cally turned off.
Recording the Auto Accompaniment
When recording Auto Accompaniment,
the rhythm is recorded to tracks 9
through 10, bass to track 11, and chordal
backing to tracks 12 through 16.
The Chord Sequence function (page 121)
lets you record the Auto Accompaniment
without having to play chord parts in
tempo.
When any part is set to REC, the remain-
ing capacity of the disk (in kilobytes) is
shown to the right of the tempo indicator
in the display. Empty 2DD and 2HD disks
should have about 690 KB (about 69,000
notes) and 1400 KB (about 140,000
notes), respectively.
When the ACMP&RHY part is set to REC,
the metronome will sound to provide a
timing guide before recording is started.
Song Recording
When a part is set to REC (recording enabled), the Synchronized
Start function is set to stand-by, and recording automatically starts
when you play the keyboard.
111
SONG REC
PLAY/
STOP
SONG CONTROL
Songs Recorded on Other Instruments
The Clavinova may display the Convert
to CVP song? message (page 166) If you
attempt to record data to a song created
on another instrument. Press YES to
convert the song before recording.
When a song is converted as described
here, it may not be possible to record
data in tracks other than tracks 1 or 2.