128 CVP-201

ZSpecify the two tracks to be mixed...............................................

Press the TRK A and TRK B buttons to highlight the corresponding
functions, and use the data dial or [–] and [+] buttons to select the numbers
of the two tracks to be mixed. The voices which are used for the selected
tracks are indicated above these functions in the LCD display.

XSpecify the destination track. ..............................................................

Use the TRK C function to specify the track to which you want to
record the mixed data. You can also specify the track for the mixed data
by pressing the TRK C button to highlight the corresponding function,
then using the data dial or [–] and [+] buttons.
Any previous data in the destination track will be erased.

CExecute the Track Mix operation. .....................................................

Press the MIX button to begin execution of the Track Mix operation.
An “Are you sure?” message is displayed. Press YES to execute the
Track Mix operation or press NO to cancel.
When the operation is completed, the MIX function will be replaced
by the UNDO function, allowing you to undo the Track Mix operation
and restore the previous data.
Press the [REC] button (the lamp goes out) to exit the Track Mix
function.
You can also exit the Track Mix function by pressing the [EXIT] but-
ton.
•The original data will remain in tracks
A and B after the Track Mix function is
executed. If the old data is not needed,
you should delete it. (See “Track De-
lete,” below.)
•A bar graph indicating the progress of
the Track Mix operation will appear
while the data is being processed.
•You can check whether the results are
what you expected by starting and
stopping playback with the [PLAY/
STOP] button. (You should try this
before you do something that would
make it impossible to select the UNDO
function.)
•The Undo function cannot be used
once you’ve selected another track or
exited from this mode.
•The Undo feature cannot be used for
data recorded to internal memory (see
page 133).
Other Record Edit Functions
126
Press the TRACK EDIT button in the RECORD EDIT display to call
up the TRACK EDIT display. There are three pages in the TRACK EDIT
display: TRACK EDIT [MIX], TRACK EDIT [DELETE], and TRACK
EDIT [QUANTIZE].

■Track Mix (TRACK EDIT page 1)

The Track Mix function combines the data from two specified tracks
and copies the result to a third specified track.
Track Edit
Track Copy
Only tracks containing data can be se-
lected by the TRK A and TRK B func-
tions. In addition, “---” (no track) can also
be selected for TRK B. In this case, the
data in track A will simply be copied to
track C.
For the Track Mix function, the selected
track voice and volume data, etc. (i.e., all
data except note data) in track A will be
effective for the destination track after the
mix operation.