127
CVP-201

ZEnter the desired name. .........................................................................

Use the > button to move the underline cursor to the desired char-
acter position in the file name display. (File names can be up to 12
characters in length).
➾ Use the data dial or [–] and [+] buttons to select and highlight
the character or mark you wish to enter.
Press the CH.SET button to enter the selected character to the cur-
rent cursor position and move to the next position. Continue entering
other characters or marks in this way.
To delete the character at the previous position, press the BACK
button. The character before the underline cursor is deleted and the
cursor moves back to the deleted position.
To abort the Song Name operation and return to the RECORD
EDIT display, press the CANCEL button.

XRegister the name........................................................................................

When the song file name is complete, press the OK button to regis-
ter it. The new name is registered as the current song file name. To
cancel the operation, press the CANCEL button.
This function is used to name song files recorded with the
Clavinova or to change existing names. To call up the Song Name
function, press the SONG NAME button in the RECORD EDIT dis-
play.
Song Name
The Song Name function cannot be used
when a disk has not been inserted in the
disk drive.
125
Other Record Edit Functions
➾Press YES to save the current panel setup, or CANCEL to return
to the RECORD EDIT display.
➔The Clavinova displays the “Don’t remove the disk!” mes-
sage and bar graph as it saves the data to the disk, then dis-
plays a “Completed!” message before it returns to the
RECORD EDIT page.