42 CVP-201
Use the TYPE ▲ and ▼ buttons to change the reverb type, or select
the TYPE function and use the data dial or the [–] and [+] buttons.
➔The selected reverb type is highlighted.
Because the basic setting of the reverb type depends on the accompa-
niment style, the reverb type may change automatically when you select
a different style.
• The reverb type selection affects all
voices played by the keyboard or Auto
Accompaniment. Different settings
cannot be made for each part.
• Depending on the selected voice, the
depth of the effect may sound stronger
or weaker, even though the same
reverb type is selected.
• The reverb effect cannot be applied to
the sounds input through the AUX IN
[R] and [L/L+R] jacks.
• It is also possible to apply reverb ef-
fects to the keyboard voices using the
[EFFECT] button. See the Effect Type
List on page 46 for details.
• If both the [REVERB] and [EFFECT]
buttons are turned on, both effects will
be applied.

■Setting the Total Depth ................................................................................

The overall depth of the selected reverb effect can be set using the
TOTAL DEPTH function in the REVERB display.
ZSelect the TOTAL DEPTH function.
➔The TOTAL DEPTH function is highlighted.
TOTAL DEPTH
• Range: 0 (no effect) — 127 (max.)
• Basic setting: 64
Reverb Type
• Settings: See table on page 162.
• Basic setting: Depends on style.

■Changing the Reverb Type .....................................................................

You can change the reverb type using the REVERB display.
XUse the PAGE [<] and [>] buttons to switch between the
REVERB page and the REVERB DEPTH page.
If you press the [
>
] button while the
REVERB DEPTH page is showing, the
CHORUS page will be displayed. Refer
to the other sections of this chapter for
details on chorus and other effect set-
tings.
➔The LCD displays either the REVERB page or the REVERB
DEPTH page (whichever was selected most recently).
Reverb
40