Yamaha DME DME Designer Operation

DME Setup Manual 12

●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●

The process of launching the DME Designer application and combining and connecting various audio components

to create conﬁgurations is described below. The DME device(s) can be disconnected from the computer while

creating conﬁgurations.

1Click [Start] ➞ [All Programs] ➞ [YAMAHA OPT Tools] ➞ [DME Designer] ➞ [DME Designer] to launch the

DME Designer application.

When the DME Designer is launched a new project will be created and a new zone (Zone 1) will appear in the designer

window.

If the designer window shown above does not appear, click the main panel window [Show/Hide] button to reveal it.

2Place the appropriate DME objects in the designer window.

Select the required DME objects from the Toolkit window on the left of the display. Objects can be dragged and dropped into

the zone window, or double-clicked to place them in the current zone.

nWhere required set the device group or sampling rate via the dialog box that appears when placing DME objects.

nIf the sampling rate set here and the actual sampling rate set for the DME operation are different, excessive DSP may be required

and operation may not be possible. Be sure to match the sampling rates.

DME Designer Operation

Main Panel Window

Designer Window

Drag and Drop, or

Double-click