DME Setup Manual 16
10 Select the [DME Designer -> Device] button, then click [OK] and the DME Designer configuration will be
transferred to the DME device.
When synchronization has finished the [Go On-line] button will be grayed out and the main panel window [On-line] button
will light.
nWhen a configuration has already been transferred to a DME unit, we recommend using the [DME Designer <- Device] button for
synchronization. The transfer time is faster than using the [DME Designer -> Device] button. However, if the configuration has
been edited it is necessary to use the [DME Designer -> Device] button.
To go offline either click the main panel window [On-line] button or the [Go Off-line] button in the Synchronization dialog
box.
For more in-depth information on using the DME Designer application for system design, refer to the pdf-format
DME Designer manual. If you will be using CobraNet for audio connections, the required bundle numbers and
related settings must be made via the DME Designer application. If you will be using EtherSound for audio
connections, the routing and other EtherSound settings must be made via the AuviTran AVS-ESMonitor software.