DME Setup Manual 3
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
DME Designer and DME-N Network Driver Installation
Install the DME Designer application and DME-N Network Driver from the DME Designer Combo Installer by
following the procedure outlined below.
nThe following procedure is applicable even if an older version of the DME Designer and/or DME-N Network Driver is already installed.
nBe sure to read the license agreement at the end of this document before installing this software.
1Open the downloaded and extracted “DME Designer Combo Installer V*.*.*” folder (*.*.* will be the version
number on the actual file), and double-click the “setup.exe” file located in the “Installer” folder.
The DME Designer Combo Installer setup dialog window will appear on the display.
2Follow the on-screen instructions to install the software.
The DME Designer will be installed first, followed by the DME-N Network Driver.
If a previous version of the DME Designer and/or DME Network Driver exists on the computer, the older software will be
uninstalled before installation of the new software begins. After the older software has been uninstalled, you will be asked to
restart the computer. In this case the computer must be restarted before the installation process can continue. The installer
will automatically be re-launched and the installation will continue after the computer has been restarted.
The software will be installed in a “DME Designer” folder in the “Program Files\YAMAHA\OPT Tools” folder (default).
nRefer to the pdf-format DME Designer manual for operating instructions. The manual is not installed by the installer. Download the
manual separately from the “Downloads” page on the Yamaha Pro Audio website.
http://www.yamahaproaudio.com/
nDME Designer V3 cannot communicate with DME devices using firmware version 2 or earlier. If you are using DME Designer V3, be
sure to update the DME device firmware to the latest version that can be downloaded from Yamaha Pro Audio website.
http://www.yamahaproaudio.com/
nThe installer will launch automatically when the computer is restarted after the uninstall process, but in rare cases the installer may
be hidden by the task bar. In such cases click this icon to continue the installation.