DME Setup Manual 8
4 Master ID
When a device is assigned as a Slave in Master/Slave (2) above, this sets the host address for the Master device in that
group. This parameter cannot be set for the Master device.
5 Link Mode
Make sure that “100Base-TX” is selected.
10 If the system includes multiple DME devices, repeat the above settings for each individual device.
Refer to the DME manual for information on audio connection and further network connection details.
nIf you will be using CobraNet™ for audio connections, the required bundle numbers and related settings must be made via the DME
Designer application.
nIf you will be using EtherSound™ for audio connections, the routing and other EtherSound settings must be made via the AuviTran AVS-
ESMonitor software available from the AuviTran website:
http://www.auvitran.com/view.php?products_AVS-ESMonitor.php

Directly Connecting a Single DME Device to a Computer

When only one DME device is to be controlled, connect the device to the computer via a USB cable as described
in “DME Network Setup” on page 6.

Connecting Multiple DME Devices to a Computer in the Same Subnet

Connect multiple DME devices to the computer via a switching hub and Ethernet cables.
nIt is possible to connect the computer to the Device Group Master using a USB cable.It is also possible to connect the computer to a
Slave DME using a USB cable if a DME Satellite is assigned as the Device Group Master.
nUse a switching hub that is capable of 100Base-TX operation.
nThe maximum length of cables that can be used to connect DME units to a switching hub is 100 meters. Proper operation at this length,
however, will depend on the quality of the hub and cables used, and cannot be guaranteed.
nUse CAT5 STP (shielded twisted pair) type cable to maximize resistance to electromagnetic interference.
Computer to DME Connection
USB cable
Group Master
DME Satellite (IP Address: 192.168.0.2)

Device Group

Ethernet cable
Ethernet cable
Ethernet straight cable
Ethernet straight cable
DME Satellite
(IP Address: 192.168.0.3)
(Master ID: 2) DME64N/24N
(IP Address: 192.168.0.250)
(Master ID: 2)
Computer
(IP Address: 192.168.0.100)
Switching hub