Yamaha DPX-530 owner manual Menu overview

7Menu

◆Menu overview

Menus are not displayed when no signal is received by the projector.

IMAGE

SET UP

CONTRAST		0 - 60
BRIGHTNESS		± 30
WHITE ENHANCE *1		DEFAULT, 0 - 10
sRGB		ON , OFF
COLOR TEMP. *1		HIGH	CONTRAST R	0 - 60
		MID	CONTRAST B	0 - 60
		LOW	BRIGHTNESS R	± 30
		CUSTOM	BRIGHTNESS B	± 30
SATURATION	*1 *3	0 - 20
HUE	*1 *3	± 10
SHARPNESS	*3	0 - 10
GAMMA	*1	DEFAULT, DYNAMIC, CINEMA1, CINEMA2
KEYSTONE		± 20
AUTO POWER ON		ON , OFF
AUTO POWER OFF		OFF, 5, 10, 15, 30, 60 min
SPLASH SCREEN		ON , OFF
HIDE SCREEN COLOR		BLUE, BLACK
LAMP MODE		BRIGHT, CINEMA
LOCATION		FRONT/TABLE, REAR/TABLE, REAR/CEILING, FRONT/CEILING

INITIAL

SIGNAL

MENU POSITION		UPPER LEFT, LOWER RIGHT
PROGRESSIVE MODE*3		AUTO , VIDEO
COLOR SYSTEM *3		AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
ASPECT		DEFAULT, NORMAL, SQUEEZE, ZOOM, THROUGH				*2
LANGUAGE		, ENGLISH, ESPANÕL, DEUTSCH, FRANÇAIS, ITALIANO,
RESET ALL		EXECUTE
HORIZ.POSITION*3		0 - 999	*2
VERT.POSITION *3		0 - 999	*2
PHASE	*3	0 - 31
TRACKING	*3	0 - 9999	*2
D-SUB INPUT	*3	RGB, COMPONENT
SET UP LEVEL	*3	OFF, 3.5%, 7.5%
SYNC NOISE MASK *3		ON		BEGIN	0 - 99
		OFF		END	0 - 99
A/D SETTING	*3	EXECUTE		CLAMP POSITION	0 - 63		*2
				CLAMP WIDTH	1 - 63		*2
				LPF *3	ON , OFF

After selecting the items marked with , press the ENTER button.

*1: Not available when sRGB is set to ON.

*2: Setting range differs depending on the input signals.

*3: Refer to the chart below for availability / unavailability.

SATURATION	Unavailable when the input source is DVI or the D-SUB source is an RGB signal.
HUE	Available only when the VIDEO or S-VIDEO source is an NTSC-M or NTSC-4.43 signal.
SHARPNESS	Unavailable when the D-SUB or DVI source is a computer signal.
PROGRESSIVE MODE	Available only when the input signal is TV50, TV60, 480i or 576i.
COLOR SYSTEM	Available only when the input source is VIDEO or S-VIDEO.
HORIZ. POSITION	Unavailable when the DVI source is a computer signal.
VERT. POSITION	Unavailable when the DVI source is a computer signal.
PHASE	Unavailable when the input source is VIDEO, S-VIDEO or DVI.
TRACKING	Available only when the D-SUB source is a computer signal.
D-SUB INPUT	Available only when the input source is D-SUB, except 480i and 576i.
SET UP LEVEL	Unavailable when the D-SUB or DVI source is a computer signal.
SYNC NOISE MASK	Unavailable when the input source is VIDEO, S-VIDEO or DVI.
A/D SETTING	Unavailable when the input source is VIDEO, S-VIDEO or DVI.
LPF	Available only when the COMPONENT or D-SUB source is a 480i, 480p, 576i or 576p signal.

19