14Troubleshooting

Troubleshooting

Refer to the chart below when this projector does not function properly. If the problem you are experiencing is not listed below or if the instructions do not help, stop using the projector and contact your dealer.

No image appears on the screen.

Problem

Solution

 

 

 

 

Power can not be turned on.

• Check whether the indicators are on or off and how they are lightning.

 

 

 

 

 

 

 

 

 

POWER

STATUS

 

Solution

 

 

 

 

 

 

 

 

 

 

 

Connect the power cable to the projector.

 

 

Off

Off

Plug the power cable into a wall outlet.

 

• If any objects are blocking the air intake or exhaust vent, remove them and carry out the

 

following.

 

1.

Unplug the power cable from the wall outlet.

Off

2.

Make sure that the projector has cooled off.

 

3.

Plug the power cable into the wall outlet.

 

4.

Press the STANDBY/ON button.

 

 

 

• If any objects are blocking the air intake or exhaust vent, remove them.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Don't expose the air exhaust vents to hot air emitted from a heating appliance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

• Clean the ventilation grilles.

 

 

Steady red

 

 

orange

• Relocate the projector to a cooler place.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• After the STATUS indicator stops blinking, press the STANDBY/ON button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• If you unplug the power cable while the fan is rotating, the lamp may not turn on about

 

 

 

 

 

 

 

 

 

 

 

Blinking

one minute when you plug the power cable next time.

 

 

 

 

 

 

 

 

 

 

 

• The lamp can't turn on again for one minute after it goes out.

 

 

 

 

 

 

 

 

 

 

 

green

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Press the STANDBY/ON button several times.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Replace the lamp. (The lamp is at the end of its life.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Steady red

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Attach the lamp cover on the bottom.

 

 

 

 

 

 

 

 

 

 

 

Off

 

 

 

 

Blinking red /

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• Unplug the power cable from the wall outlet and contact your dealer.

 

 

 

 

 

 

 

 

 

 

 

green

Steady

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

or

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Blinking

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

No image appears on the

• Check that the lens cap is removed.

screen.

• It may take about one minute for the lamp to light up.

 

• The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again.

 

• If the projector was turned off before the lamp cooled down completely, the fans may start rotating and the

 

 

STANDBY/ON button may not function when you plug the power cable into the wall outlet next time.

 

 

Wait for the fans to stop and press the STANDBY/ON button to turn on the lamp again.

 

• Check that the intake vent is clean.

 

• Check that the lamp cover is closed (see page 29).

 

• Check that the cables connected to the external devices are not broken.

 

• If an extension cable is being used, replace it with the supplied cable for troubleshooting purposes. If

 

 

images are now displayed correctly, add an RGB signal amplifier to the extension cable.

 

 

 

Projected images suddenly

The air intake or exhaust vent may be blocked. (In such cases, the STATUS indicator blinks orange.)

disappear.

 

Remove the objects blocking the intake vent and/or exhaust vents and then carry out the following

 

 

procedure.

 

• Wait for the air intake or exhaust fan to stop (or wait for the STATUS indicator to go out.)

 

• Unplug the power cable from the wall outlet.

 

• Wait about 10 minutes.

 

• Plug the power cable into the wall outlet.

 

Press the STANDBY/ON button.

 

• When the STATUS indicator is steady red, it is indicating that the lamp should be replaced. Replace the

 

 

lamp with a new, commercially available lamp.

31

Page 35
Image 35
Yamaha DPX-530 owner manual Troubleshooting, No image appears on the screen

DPX-530 specifications

The Yamaha DPX-530 is an innovative and versatile digital projector designed to meet diverse presentation needs. Known for its exceptional image quality and advanced features, the DPX-530 is ideal for corporate, educational, and entertainment environments.

One of the key features of the DPX-530 is its impressive brightness, with a lamp output of approximately 3,200 ANSI lumens. This ensures vivid and clear images even in well-lit rooms, making it suitable for a wide range of settings. The projector utilizes a native XGA resolution of 1024 x 768 pixels, which provides sharp and detailed visuals, ensuring that presentations, videos, and images are displayed with stunning clarity.

The technology incorporated into the DPX-530 includes a 3LCD design, allowing for brilliant color reproduction and dynamic contrast ratios. The color light output is balanced, producing vibrant and lifelike colors that enhance the viewing experience. This feature is particularly beneficial for showcasing graphics and detailed imagery, making the projector a favorite among educators and business professionals alike.

In addition to its excellent image performance, the Yamaha DPX-530 offers a range of connectivity options. It includes multiple inputs such as VGA, composite video, and S-Video, allowing users to connect various devices easily. The inclusion of HDMI connectivity also facilitates the connection to modern digital devices, ensuring compatibility with the latest technology.

Portability is another advantage of the DPX-530. The compact and lightweight design makes it easy to transport and set up in different locations. It is equipped with an automatic keystone correction feature, which helps to maintain a rectangular image even when the projector is not perfectly aligned with the screen. This feature ensures that users can achieve optimal projection angles with minimal effort.

The DPX-530's user-friendly interface further enhances its appeal. The on-screen menus and controls are intuitive and easy to navigate, allowing users to adjust settings quickly based on their preferences. Additionally, the projector includes features like a quick start-up and shut-down time, enabling users to focus on their presentations rather than technical adjustments.

Overall, the Yamaha DPX-530 stands out as a reliable and efficient digital projector, combining powerful performance with user-friendly features. Whether used for business presentations, educational lectures, or home entertainment, its advanced technologies ensure a high-quality visual experience, making it a valuable tool for any environment.