Yamaha DSP-AX3200 ■IMPEDANCE SELECTOR switch

SPEAKER SETUP

■IMPEDANCE SELECTOR switch

WARNING

Do not change the IMPEDANCE SELECTOR switch setting while the power of this unit is on, otherwise this unit may be damaged.

If this unit fails to turn on when STANDBY/ON (or SYSTEM POWER) is pressed, the IMPEDANCE SELECTOR switch may not be fully slid to either position. If so, slide the switch to either position fully when this unit is in the standby mode.

Select the left and right position according to the impedance of the speakers in your system. Be sure to move this switch only when this unit is in the standby mode.

IMPEDANCE								Switch	Speaker	Impedance level
SELECTOR											PREPARATION
switch								position		each speaker must be 8 Ω or higher.
					IMPEDANCE SELECTOR
										If you use one set of main speakers, the impedance of
						SET BEFORE POWER ON
										each speaker must be 4 Ω or higher.
						REAR	: 6ΩMIN. /SPEAKER		Main
						REAR CENTER : 6ΩMIN. /SPEAKER
						CENTER	: 4ΩMIN. /SPEAKER			If you use two sets of main speakers, the impedance of
						MAIN	A OR B : 4ΩMIN. /SPEAKER
							A+B : 8ΩMIN. /SPEAKER
						REAR	: 8ΩMIN. /SPEAKER	Upper
						REAR CENTER : 8ΩMIN. /SPEAKER
						CENTER	: 8ΩMIN. /SPEAKER		Center	The impedance must be 4 Ω or higher.
						MAIN	A OR B : 8ΩMIN. /SPEAKER
							A+B : 16ΩMIN. /SPEAKER
									Rear	The impedance must be 6 Ω or higher.
									Center
									Rear	The impedance of each speaker must be 6 Ω or higher.
					AC OUTLETS				Main	If you use one set of main speakers, the impedance of
										each speaker must be 8 Ω or higher.
										If you use two sets of main speakers, the impedance of
										each speaker must be 16 Ω or higher.
				SWITCHED 100W MAX. TOTAL				Lower
	IMPEDANCE SELECTOR
		SET BEFORE POWER ON							Center	The impedance must be 8 Ω or higher.
		CENTER	: 4ΩMIN. /SPEAKER
		REAR	: 6ΩMIN. /SPEAKER
		REAR CENTER : 6ΩMIN. /SPEAKER
		MAIN A OR B : 4ΩMIN. /SPEAKER
			A+B : 8ΩMIN. /SPEAKER
		REAR	: 8ΩMIN. /SPEAKER
		REAR CENTER : 8ΩMIN. /SPEAKER							Rear	The impedance must be 8 Ω or higher.
		CENTER	A+B : 16ΩMIN. /SPEAKER
			: 8ΩMIN. /SPEAKER
		MAIN A OR B : 8ΩMIN. /SPEAKER
									Center
									Rear	The impedance of each speaker must be 8 Ω or higher.

(Europe model)

English

13