Yamaha DSP-AX3200 ■Remote control

TROUBLESHOOTING

■Remote control

Problem	Cause	Remedy	Refer to
			page
The remote control	Wrong distance or angle.	The remote control will function within a	7
does not work nor		maximum range of 6 m (20 feet) and no more
function properly.		than 30 degrees off-axis from the front panel.
	Direct sunlight or lighting (from an	Reposition this unit.	—
	inverter type of fluorescent lamp, etc.) is
	striking the remote control sensor of this
	unit.
	The batteries are weak.	Replace all batteries with new ones and press	3
		RESET.
	The manufacturer code has not been	Set the manufacturer code correctly.	38
	correctly set.
		Try to set the other codes of the same	38
		manufacturer.
The remote control	The batteries of this remote control and/	Replace the batteries.	3
does not “learn” new	or the other remote control are too weak.
functions.
	The distance between the two remote	Place the remote controls at the proper distance.	39
	controls is too much or too little.
	The signal coding or modulation of the	Learning is not possible.	—
	other remote control is not compatible
	with this remote control.
	Memory capacity is full.	Further learning is not possible without deleting	43
		unnecessary functions.
	Even if the manufacturer code is	Program the necessary functions independently	39
	correctly set, there are some models that	into the programmable buttons on this unit’s
	do not respond to the remote control.	remote control using the Learn feature.
Continuous functions	The learning process is incomplete.	Be sure to press and hold the function button on	39
such as volume		the other remote control until “OK” appears in
adjustment are learned,		the display window.
but operate only for a
moment before
stopping.

72