iMACRO
Used to program a series of operations for control by a single button (see pages 40 to 42).
oMACRO ON/OFF
Turns the macro function on and off.
pÅ and ı
Switch the control area for the extra components that are not connected to this unit without changing the input.
aInput selector buttons
Select the input source and change the control area.
s6CH INPUT
Selects the source connected to the 6CH INPUT jacks.
dDSP program/Numeric buttons
Select DSP programs or numbers according to the position of 10KEY/DSP.
fMUTE
Mutes the sound. The MUTE indicator turns on when the MUTE function is on. Press again to restore the audio output to the previous volume level.
gVOLUME +/–
Increases or decreases the volume level.
hSTEREO/EFFECT
Switches the normal stereo or DSP effect reproduction. When STEREO is selected,
jPARAMETER/SET MENU
Selects the PARAMETER mode or SET MENU mode.
kCursor buttons
Select and adjust DSP program parameters and SET MENU items according to the position of PARAMETER/ SET MENU.
CONTROLS AND FUNCTIONS
Using the Remote Control
30° |
|
|
| 30° | Approximately 6 m (20 feet) | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The remote control transmits a directional infrared beam. Be sure to aim the remote control directly at the remote control sensor on the main unit during operation.
■Handling the remote control•Do not spill water or other liquids on the remote control.
•Do not drop the remote control.
•Do not leave or store the remote control in the following types of conditions:
–high humidity or temperature such as near a heater, stove or bath;
–dusty places; or
–in places subject to extremely low temperatures.
INTRODUCTION
English
7