REMOTE CONTROL FEATURES

2 Press MACRO to clear a programmed macro by using a ballpoint pen or similar object.

MACRO

3 Press and hold CLEAR by using a ballpoint pen or similar object, and at the same time press the button for which you want to clear the macro for about 3 seconds.

“C:OK” appears in the display window.

CLEAR

y

•You can clear other learned functions and macros at this time by holding down CLEAR again and pressing the other buttons for which those learned functions or macros have been programmed.

Note

•“C:NG” appears in the display window if the operation is unsuccessful. In this case, try step 3 again.

4 Press MACRO again to exit from the clearing mode.

Once you have cleared a learned function or macro for a button, the button reverts to the factory setting.

MACRO

■SOURCE SELECT k / n

You can control another component independently from the input you have selected by pressing an input selector button.

Press SOURCE SELECT k / n to choose the component and set the remote control to be used for it.

The display window will show one of the following: (when pressing n) OPTN (option), Å, ı, PHONO, V-AUX, TUNER, MD, CD-R, CD, TV/LD (TV or digital TV/LD), CBSAT (cable TV/satellite tuner), VCR 1, VCR 2, DVD.

y

•Pressing kshows the same in the reverse order, but you cannot select OPTN.

SOURCE

SELECT

■OPTN (option) area

OPTN is an extra component control area that can be programmed with other remote control functions.

Note

•You cannot set up the manufacturer code in this area. See page 38 for the programming procedure.

 

 

 

 

6CH INPUT

 

 

TITLE

 

 

 

 

 

ENTER

 

SOURCE

 

 

 

 

 

DISPLAY

MENU

 

SOUND

SELECT

SEARCH

– CHAPTER +

POWER

REC

STOP

PAUSE

PLAY

Pressing n always selects OPTN first

44