Yamaha DSP-E800 Connecting the Speakers and the External Amplifier, Basic connection, ■S VIDEO terminals, ■Connecting a center speaker, ■Connecting 2-channelamplifier

■S VIDEO terminals

		Cable TV/			TV Monitor
TV/Digital TV
		satellite tuner
S VIDEO			S VIDEO
OUT			OUT		S VIDEO IN
S			S
	1	2 3	4		S
		IN OUT	MONITOR
DVD/LD D–TV	CBL/SAT	VCR	OUT	DV
	S VIDEO SIGNAL				S Video signal
				S
S
		S	S		Signal flow
S VIDEO	S VIDEO		S VIDEO
OUT		OUT	IN
DVD/LD player			VCR

CONNECTIONS

If your video components have “S” (high-resolution) video terminals, they can be connected to this unit’s S VIDEO terminals. Be sure to connect the input (IN) and output (OUT) properly.

Notes

•Use a special S VIDEO cable (commercially available) for the S VIDEO connection.

•If video signals are input from both the S VIDEO input and composite input terminals, the signals will be directed to their respective output terminals.

PREPARATION

Connecting the Speakers and the External Amplifier

Subwoofer

Rear speakers		system
Right	Left

Center speaker

SPEAKERS
CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING.
CENTER	REAR
	(SURROUND)
R	L
			IMPEDANCE
+			SET BEFORE
		OUTPUT
			REAR	: 4Ω
	MAIN	REAR CENTER
			CENTER : 4Ω
		(SURROUND)
			REAR	: 8Ω

LCENTER : 8Ω

–

R

SUB

WOOFER

Main speaker	Main speaker
Right	Left
L	R
MAIN
IN
R	L

Basic connection

It is necessary to connect a 2-channel amplifier to this unit in order to drive main speakers.

Be sure to connect the right channel (R), left channel (L), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.

■Connecting 2-channel amplifier

Connect the input terminals of a 2-ch power amplifier to the MAIN OUTPUT terminals of this unit. If you connect the AUX input terminals of the external amplifier to the MAIN OUTPUT terminals of this unit, be sure to set the volume of the external amplifier around –16 dB to –18 dB.

■Connecting a rear speaker system

Connect a rear speaker system to the REAR SPEAKER (SURROUND) output terminals of this unit.

2-ch power amplifier

CAUTIONS

•Use speakers with the specified impedance shown on the rear panel of this unit.

•Do not let the bare speaker wires touch each other and do not let them touch any metal part of this unit. This could damage the unit and/or speakers.

■Connecting a center speaker

Connect a center speaker to the CENTER SPEAKER output terminals of this unit.

■Connecting a subwoofer system

Connect the input terminal of a subwoofer system to the SUBWOOFER OUTPUT terminal of this unit.

English

E-11