RECORDING A SOURCE ON TAPE, MD OR VIDEO CASSETTE
Recording adjustments and other operations are performed from the tape deck, MD recorder or VCR. Refer to the instructions for these components.
|
|
|
|
|
|
|
| 2 | 1,4 |
NATURAL SOUND AV PROCESSOR/AMPLIFIER |
| CINEMA DSP |
|
|
| ||||
|
|
|
|
|
|
|
|
| VOLUME |
|
|
|
|
|
|
|
| INPUT SELECTOR |
|
STANDBY/ON |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| INPUT MODE |
|
– | SET MENU | + | NEXT | TAPE/MD MON | EFFECT |
| PROGRAM |
|
|
|
|
|
| /6CH INPUT |
|
|
|
|
|
|
|
|
|
| 6CH INPUT |
|
|
|
|
|
|
|
|
| CD | TUNER TAPE/MD |
|
| |
|
|
|
|
| DVD/LD | VCR | 2 |
| |
|
|
|
|
|
| CBL/SAT |
|
|
SLEEPMUTING
–VOLUME +
4
y
If a tape deck or MD recorder is being used for recording, you can monitor the sounds being recorded by pressing TAPE/MD MON / 6CH INPUT (or TAPE/MD).
Notes
•The DSP program and the setting of VOLUME have no effect on the material being recorded.
•Composite video and S video signals pass independently through this unit’s video circuits. Therefore, when recording or dubbing video signals, if your video source component is connected to provide only an S video (or only a composite video) signal, you can record only an S video (or only a composite video) signal by your VCR.
•A source connected to this unit only through the digital terminals cannot be recorded by the tape deck, MD recorder or VCR connected to this unit.
•A source connected to the 6CH INPUT terminals of this unit cannot be recorded.
•Check the copyright laws in your country to record from records, CDs, radio, etc. Recording of copyrighted material may infringe copyright laws.
If you play back a video source that uses scrambled or encoded signals to prevent it from being dubbed, the picture itself may be disturbed due to those signals.
1 Set VOLUME to the “ m” | VOLUME |
position. |
|
Front panel
2Select the source you want to record.
INPUT SELECTOR | CD | TUNER |
| DVD/LD | |
| or |
|
|
| CBL/SAT |
Front panel | Remote control |
3Begin recording by the tape deck, MD recorder or VCR connected to this unit.
4Play the source and then turn up the volume to
confirm the input source.
VOLUME
or | – | VOLUME + |
|
|
OPERATION BASIC
Front panel | Remote control |
English