ADJUSTING THE SPEAKER BALANCE
This procedure lets you adjust the sound output level balance between the main, center and rear speakers by using the
The adjustment of each speaker sound output level should be performed at your listening position with the remote control. After completing the adjustments, use VOLUME +/– at your listening position to check if the adjustments are satisfactory.
2 | 1 |
NATURAL SOUND AV PROCESSOR/AMPLIFIER | CINEMA DSP |
| VOLUME |
| INPUT SELECTOR |
STANDBY/ON
INPUT MODE
– | SET MENU | + |
|
| NEXT | TAPE/MD MON | EFFECT | PROGRAM | ||||
|
|
|
|
|
|
| /6CH INPUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 |
| POWER |
|
|
|
| |
|
|
| CD | TUNER TAPE/MD |
| ||
| PROGRAM |
|
|
|
| ||
| /DTS | MOVIE | MOVIE | DVD/LD | VCR |
| |
| SUR. | THTR 1 | THTR 2 |
| |||
| 1 | 2 | 3 |
|
|
|
|
| MONO MOVIE | TV SPORTS | DISCO |
| CBL/SAT |
|
|
| 4 | 5 | 6 |
|
|
|
|
| ROCK | HALL |
| SLEEP | MUTING |
| |
| 7 | 8 |
|
|
|
|
|
3,7 | TEST |
| EFFECT | – VOLUME | + | 4 | |
|
|
|
|
|
| ||
|
| DSP |
| 6 |
|
|
|
5 | TIME/LEVEL |
| SET MENU |
|
|
| |
|
|
|
|
|
|
| |
| 6CH INPUT |
|
|
|
|
|
|
| CD | TUNER | TAPE/MD |
|
|
|
|
1 Set VOLUME to the “ m” | VOLUME |
| |
position. |
|
| Front panel |
2Turn the power on.
POWER
STANDBY/ONor
Front panel | Remote control |
3Press TEST.
“TEST LEFT” appears on the display.
TEST
4Turn up the volume.
You will hear a test tone (like pink noise) from each speaker for about two seconds in the following order: left main speaker, center speaker, right main speaker, right rear speaker and left rear speaker. The display changes as shown below.
TEST TEST
LEFT 
RIGHT
TEST CENTER
– VOLUME +
TEST L SUR. | TEST R SUR. |
Notes
•If the test tone cannot be heard, turn down the volume, set the unit in the standby mode and check the speaker connections.
•If the test tone cannot be heard from the center speaker, check the setting of “CENTER SP” on the SET MENU.