Yamaha DV-S5650 Video Connections, S-Video terminal A, Component Video terminal B, Preparation

Preparation

Video Connections

If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR etc.) by simply switching the input source selector of your receiver.

The player has three types of video output jacks. Use one of them in accordance with the input jacks of the equipment to be connected.

S-Video terminal <A>

S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S-video cable. Receiver (and TV) with S-video input is required.

Component Video terminal <B>

Component video connection achieves high fidelity in reproducing colors (better performance than S-video connection), separating video signal

		Y	VIDEO
S VIDEO	PR	PB	COAXIAL	OPTICAL
	COMPONENT		PCM	DIGITAL
			DTS MPEG
	VIDEO OUT		DIGITAL OUT

<A>	<B>
S
Y	PBCB	PRCR

L

R

AUDIO OUT

(supplied)

V <C>

into luminance (Y, terminal color-coded as green), and color difference (Pb, blue/Pr, red). Use commercially available coaxial cables. Receiver (and TV) with component input is required. Observe the color of each jack when connecting. If your receiver does not have component output jacks, connecting the player’s component output directly to your TV’s component input can reproduce better video image.

S VIDEO	COMPONENT VIDEO
INPUT	VIDEO IN
	AV receiver
VIDEO	COMPONENT	S VIDEO
OUT	VIDEO OUT	OUT
VIDEO	COMPONENT	S VIDEO
IN	VIDEO IN	IN

Composite Video terminal (1, 2) <C>

Use audio/video cable supplied with this unit when connecting the player to a TV.

VIDEO 1, 2 jacks of VIDEO OUT output the same signal. You can connect one to your receiver’s input using supplied Audio/Video cable, and the other to another receiver or a TV.

6