Disc Operation

Special DVD-Audio features

 

Special SA-CD features

 

 

 

Changing pages

Many DVD-Audio discs include slide show and page turn functions. You can display information pages for photo galleries, artist biographies, lyrics, etc. if these functions are available on the disc.

Press 2 / 3 to move to the previous/next page.

OR

Press PAGE repeatedly to move to the next page.

Playing bonus groups

Some DVD-Audio discs contain bonus groups that require a four-digit password to gain access. In this case, refer to the disc jacket and other packaging for information.

1When playback is stopped, enter the desired bonus group number using the numeric buttons (0-9), and then press

ENTER.

2Enter a four-digit password using the numeric buttons (0-9), and then press

ENTER.

OR

1During playback, press ON SCREEN twice.

➜The group and track list appears on the TV screen.

2Press 2 to highlight a group.

3Enter the desired bonus group number using the numeric buttons (0-9), and then press ENTER.

4Enter a four-digit password using the numeric buttons (0-9), and then press

ENTER.

Changing the playback layer and area

There are three types of SA-CD (Super Audio CD) discs: single-layer, dual-layer and hybrid. Each type may contain up to two areas of recorded information: a high quality stereo area and a high quality multi-channel area. You can switch between the SA-CD multi- channel and SA-CD stereo areas.

Note

SA-CD text is not supported with this unit.

y

For details about SA-CD, see “Super Audio CD” on page 45.

■To change the playback area

During playback, press SOUND MODE.

OR

1When playback is stopped, press 2 to display folders.

2Press 5/ to select the folder, and then press ENTER.

3Press 5/ to select the track, and then press ENTER.

Note

Even when you change the playback area using SOUND MODE, this unit selects the playback area according to [ANALOG OUTPUT] setting in “AUDIO SETUP PAGE” for other discs.

■To change the playback layer

1Press STOP ( 7 ) to stop playback.

2Press AUDIO.

➜SA-CD indicator lights up only when the SA-CD layer is selected.

•Once CD layer is selected, this unit always starts playing the CD layer until this unit is set to the standby mode.

24En