Setup Menu

Programming discs

You can play back discs in the desired order by programming the discs to be played. You can store up to 5 discs.

1Select [PROGRAM] in “GENERAL SETUP PAGE”.

2Press 3 to select [FDS], and then press

ENTER.

➜The input menu appears on the TV screen.

■To exit from program playback

9Use 2 /3/5/ to highlight [EXIT] on the program menu, and then press ENTER.

y

Program playback is canceled once tracks/discs on the menu are played back to the end.

OSD language

This menu contains various options for the on- screen display (OSD) language. For details, see “Setting the OSD language” on page 16.

FAVOURITE DISC SELECTION

(1)DISC: _

(2)DISC: _

(3)DISC: _

(4)DISC: _

(5)DISC: _

STARTEXIT

■To input your favorite discs

3Use the numeric buttons (0-9) to enter a valid disc number.

4Use 2 /3/5/ to move the cursor to the next position.

5Repeat steps 3-4to input another disc number.

■To remove a disc

6Use 2 /3/5/ to move the cursor to the disc you want to remove.

7Press 0 on the numeric buttons (0-9) to remove this disc from the program menu.

■To start program playback

8Use 2 /3/5/ to highlight [START] on the program menu, and then press ENTER.

➜Playback starts for the selected tracks or discs in the programmed sequence.

Turning the screen saver on/off

This function is used to turn on or off the screen saver. You can prevent the display from burning by turning on the screen saver.

•Select [SCREEN SAVER] in “GENERAL SETUP PAGE”.

ON

Select this to turn off the TV screen when disc playback is stopped or paused for more than 15 minutes.

OFF

Select this to disable the screen saver function.

Setting the sleep timer

This function automatically sets this unit to the standby mode after a certain elapsed period.

•Select [SLEEP] in “GENERAL SETUP PAGE”.

15, 30, 45, 60 MINS

Select one to set the sleep timer function.

OFF

Select this to cancel the sleep timer function.

30En