TROUBLESHOOTING

Problem

Cause

Remedy

Refer to page

 

 

 

 

No picture

(U.S.A. model)

 

—

 

If you play a PAL system DVD-Audio, the mes-

 

 

 

sage “This disc is PAL system. The output is sound

 

 

 

only” may appear on the monitor. No picture is

 

 

 

available because the disc uses an incompatible

 

 

 

type of video signal.

 

 

 

 

 

 

Video cannot be recorded.

Most DVD-Audio/Video discs are copy-protected

 

—

 

and cannot be recorded.

 

 

 

 

 

 

Picture appears incorrectly.

Incorrect “TV aspect” setting on the Video menu

Select the correct setting. Note that

25

 

(in Setup).

it may be difficult to adjust the

 

 

 

widescreen format of many DVD-

 

 

 

Videos to fit perfectly on a 4:3

 

 

 

video monitor.

 

 

 

 

 

 

(U.S.A. model)

 

—

 

If you play PAL system DVD-Audio, the message

 

 

 

“This disc is PAL system. The output is sound

 

 

 

only.” may appear on the monitor. No picture is

 

 

 

available because the disc uses an incompatible

 

 

 

video signal system (only audio can be played).

 

 

 

 

 

 

 

(U.S.A. model)

Turn off the PROGRESSIVE out-

13

 

Due to the editing method or material used on a DVD,

put.

 

 

ghosting may occur with progressive output.

 

 

 

 

 

 

(U.S.A. model) Part of the

The video is in poor material condition or was

Turn off the PROGRESSIVE output

13

picture doubles during pro-

edited or processed inappropriately. (Video will be

to output interlaced video signals to

 

gressive output.

played correctly via interlace output.)

a video monitor.

 

 

 

 

 

No on-screen display

 

In the Setup menu, under Display,

25

 

 

set On-Screen Messages to On.

 

 

 

 

 

On-screen menu icons not

 

Press the cursor buttons [k, n]

20

displayed or only partially

 

while the right-most icon is high-

 

displayed on the television

 

lighted to change the menu bar

 

 

 

position.

 

 

 

 

 

Excessive ghosting

 

Use the on-screen menu icons to

23

 

 

adjust the picture quality.

 

 

 

 

 

■ SACD mode

Problem

Cause

Remedy

Refer to page

 

 

 

 

The Setup menu settings are

Setup menu settings are not effective in SACD

Set the parameters for SACD mode,

31, 32

not effective.

mode.

instead of using the Setup menu.

 

 

 

Some parameters may not be avail-

 

 

 

able.

 

 

 

 

 

No digital signal is output

Digital signals cannot be output from a Super

 

—

from the digital output jack.

Audio CD.

 

 

 

 

 

 

■Remote control

Problem

Cause

Remedy

Refer to page

 

 

 

 

The remote control does not

The remote control was operated at an angle or dis-

The remote control will function

3

function properly.

tance in excess of its operating range.

within a maximum range of 6 m (20

 

 

 

feet) and no more than 30 degrees off-

 

 

 

axis from the front panel.

 

 

 

 

 

 

Direct sunlight or lighting (from an inverter type of

Reposition the unit.

—

 

fluorescent lamp, etc.) is striking the remote control

 

 

 

sensor of the unit.

 

 

 

 

 

 

 

The batteries are weak.

Replace all batteries with new ones.

3

 

 

 

 

34