Initial settings
Selecting digital output
Select the digital output to be output from the optical/coaxial digital audio output connector of the unit.
1 At the initial settings screen
Press )/* to select “7 Digital Audio Out- put” and press SELECT.
Digital Audio Output
1 LPCM (DVD) Off
2 | Dolby Digital Bitstream | |
3 MPEG | PCM | |
0 | Exit |
|
2 Press )/* to select the preferred item
When “1 LPCM (DVD)” is selected
Off: Only linear PCM of 48 kHz/16 bit is output from the digital audio output connector. During playback of the DVD recorded in the linear PCM of 48 kHz/20 bit/24 bit or 96 kHz, no digital audio is output. (Factory setting)
PCM: During playback of the DVD recorded in the linear PCM of 48 kHz/20 bit/24 bit or 96 kHz, digital audio converted to 48 kHz/16 bit is output. (Digital output of PCM audio is restricted to 48 kHz/16 bit or below for copyright protection.)
When “2 Dolby Digital” is selected
Bitstream: Dolby Digital
| is output. (Factory setting) |
PCM: | PCM (2ch) of 48 kHz/16 bit is output. |
When “3 MPEG” is selected
PCM: PCM of 16 bit is output. (Factory setting)
Bitstream: Bitstream is output.
3 Press )/* to select the preferred value at each screen and press SELECT.
The screen at the step 1 is displayed. Press* to “0”select
and press SELECT to return to the initial settings screen.
Also refer to “Common procedures of initial settings” on
page 31.
(Continued on the next page)
POWER | OPEN/CLOSE | 1 | |
*/ I |
|
| ~ |
@STOPgSTILL/PAUSEDPLAY |
| ||
| 3 | ||
| SLOW/ |
| |
H SKIPF SEARCH G |
|
| |
TITLE | MENU |
|
|
|
|
| SELECT |
SELECT |
|
| |
ON SCREEN |
| RETURN | |
SUBTITLEAUDIO ANGLE |
|
| |
MARKER
PLAY MODE
REPEAT
SET UP
DVD
37