Troubleshooting
If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by themeasimple- sures suggested. If it cannot be corrected, or if the fault is not listed in the SYMPTOM column, disconnect the power cordcon- and tact your authorized YAMAHA dealer or service center for help.
Symptom (Common) |
|
| Remedy |
|
|
|
| ||
|
|
| ||
No power. | Insert the AC mains lead securely into the power outlet. | |||
|
|
| ||
Power is automatically switched to the | The power is automatically switched to the standby mode | |||
standby mode. | 30 minutes have elapsed in the stop mode (auto | |||
| back on. |
|
|
|
|
| |||
ÁPlay fails to start even whenÁCondensationPLAY is has formed: wait about 1 to 2 hours to all | ||||
pressed. | ÁThis player | cannot play discs other than DVDs, Video CD | ||
ÁPlay commences but then stopsÁThe disc may be | dirty and may require cleaning. | |||
immediately. | ÁEnsure that | the | disc is installed with the label side u | |
|
|
|
|
|
No picture. | ÁEnsure that | the | equipment is connected properly. | |
| ÁEnsure that | the | input setting for the TV is an Audio/Vi | |
| AV2. |
|
|
|
|
|
|
|
|
ÁNo sound. | ÁEnsure that | the | equipment is connected properly. | |
ÁDistorted sound. | ÁEnsure that | the | input settings for the TV and stereo sy | |
Picture is distorted duringTherapidpictureadvancewill be somewhat distorted at times: this is or rapid reverse.
No rapid advance (or rapid Somreverse)discsplaymay. have sections which prohibit rapid advanc
No 4:3 (16:9) picture. | Choose the correct“TV Aspect”tupitem which matches the TV set used. | |
|
|
|
No | The “Off” setting is selected for | |
|
|
|
No surround sound. | Choose the correct setup at the “Speaker setting” which matches your stereo | |
| system. | |
|
| |
No operations can be performedÁCheckwiththethebatteries are installed withoandthep). correct pola | ||
remote control. | ÁThe batteries are depleted: replace them with new ones. | |
| ÁPoint the remote control unit at the remote control sen | |
| ÁOperate the remote control unit at a distance of not mo | |
| remote control sensor. | |
| ÁRemove the obstacles between the remote control unit an | |
No key operation (by the unitSwitchand/orthethepower to the standby mode and then return to remote control) is effectivethe. power to the standby mode, disconnect the AC mains l
it. (The player may not be operating properly due to lig some other external factor.)
GUI Screen not displayed orSelectonly partitheappropriatelly TV screen type by consulting the displayed on the TV Screen.
Symptom [DVD] | Remedy |
|
|
Play does not commence even when title Confirm the“Ratings” setting. is selected.
44