Operation
4Use 1, 2, 3, 4 to pan across the screen.
5When ENTER/OK is pressed only the panned picture will be shown on the screen.
6To exit ZOOM mode, select zoom factor to “Off” (zoom factor 1) in the menu bar.
off | 1 | 1 | no | 2 |
press OK to pan
Note:
–ZOOM mode gets deactivated when starting playback of next element in FTS across disc and Shuffle across Disc modes.
Favorite Track Selection Across Disc
●This FTS function allows you to create a list favorite tracks by selecting tracks from different discs available in the disc tray.
●The supported discs are CDDA, MP3, VCD, SVCD.
●Favorite Track Selection (FTS) list contains up to 100 elements across all the discs on the tray.
Storing a Program
1Press OPEN/CLOSE and load preferred discs onto the disc tray.
2In STOP mode, select FTS in the menu bar.
3Press 4 in the menu bar.
➜ The FTS window menu appears.
4Select All Discs option.
Storing entire disc as the FTS
1Press 4 to select DISC.
2Use 2 and 1 to select the require disc list for all the loaded discs in the disc tray.
3Press ENTER/OK to store the entire disc selection.
Storing album/title
1Press 4 to select ALBUM/TRACK. Albums are for MP3 discs and Tracks for (S)VCD.
2Use 2 and 1 to select the require Album/Track.
3Press ENTER/OK to store the entire selected Album/Track.
➜ The Album/Track. number will be added to the program list.
Storing track/chapter
1Press 4 on the selected TRACK/INDEX. Tracks are for MP3/CDDA discs and Index for S(VCD).
➜The track/chapter number will be highlighted.
2Use 2 and 1 to select the required Track/Index.
3Press ENTER/OK to confirm the selection.
➜The selected Track/Index will be added to the program list.
4Press ON SCREEN to exit the FTS menu.
Switching a Program OFF
1Use 3/4 to move to FTS.
2Press 2 or 1 to select OFF.
3Press ON SCREEN to exit.
Erasing a selection in a Program
1While playback is stopped, select FTS in the menu bar.
2Use 4 to select PROGRAM.
3Use 2 and 1 to select the required number.
4Press ENTER/OK to erase the selection.
5Press ON SCREEN to exit.
Erasing all selections
1While playback is stopped, select FTS in the menu bar.
2Use 4 to select CLEAR ALL and press ENTER/ OK.
➜ All selections will be erased.
3Press ON SCREEN to exit.
Note:
– Pressing PLAYXCHANGE or OPEN/CLOSE during playback will erase the selected Program if any.
– With VCD 2.0, set the PBC (Playback Control) to Off.
English
FTS for a Single disc
1Select FTS in the menu bar.
2Press 4 in the menu bar.
➜ The FTS window menu appears.
3Select CURRENT DISC option.
19
