Preparation
General Notes on connections
Never make or change connections with the power switched on.
●Depending on the equipment you wish to connect, there are various ways you could connect this player. Possible connections are shown in the following drawings.
●Please refer to the manuals of other equipment as necessary to make the best connections.
●Do not connect this player via your VCR. The video quality could be distorted by the copy protection system.
●Do not connect this player’s audio out jack to the phono in jack of your audio system.
Digital Connections
This player has COAXIAL and OPTICAL digital out jacks. Connect one or both of them to your AV receiver equipped with Dolby digital, DTS, or MPEG decoder using each specific cable (separate purchase).
|
|
| Y |
|
|
|
|
| PB |
|
|
|
|
|
|
| 480p |
|
|
|
| R | 480i |
COAXIAL | OPTICAL |
| PR |
| SCAN MODE |
|
|
| |||
PCM | DIGITAL | S VIDEO | COMPONENT | 1 | 2 |
DTS | MPEG | ||||
DIGITAL OUT | VIDEO OUT | AUDIO OUT |
| ||
C |
| O |
|
|
|
Notes:
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all. Make sure to select the appropriate audio format at menu screen included on the disc. Pressing AUDIO once or more may change not only audio languages but also audio formats, and the selected format appears for several seconds on the status window.
–MP3 Audio is not available on the Digital Output.
Analog Connections
Use audio/video cable supplied with this player to connect the AUDIO OUT L (left) and R (right) jacks to corresponding input jacks of your audio equipment such as Stereo amplifier. You can connect a subwoofer to the SUBWOOFER jack.
VIDEO | SUB WOOFER |
Y |
|
PB |
|
| 480p |
R | 480i |
PR
COAXIAL | OPTICAL |
|
|
| SCAN MODE |
PCM | DIGITAL | S VIDEO | COMPONENT | 1 | 2 |
DTS | MPEG | ||||
DIGITAL OUT | VIDEO OUT |
| AUDIO OUT | ||
R | L |
AV receiver
COAXIAL OPTICAL
IN IN
Stereo
Subwoofer
R L
1 CD/DVD
Speakers |
amprifier
RL
Left Right
speaker speaker
You will need to set this player’s digital output to ALL (see ‘User Preference Settings’).
Video Connections
If your AV receiver has video output jacks, connect your receiver (and then to your TV) so that you can use one TV for several different video sources (LD, VCR etc.) by simply switching the input source selector of your receiver.
The player has three types of video output jacks. Use one of them in accordance with the input jacks of the equipment to be connected.
6
