Optical and backup drives
ÊRemove the four screws (see circles) to remove the drive frames.
ÊPut the old optical drive aside.
ÊFasten the drive frames at the new optical drive with the four supplied screws (see circles).
11.1.5 Installing the optical drive
Figure 134: Sliding the optical drive in the bay
ÊSlide the optical drive into the bay until it clicks into place.
Figure 135: Connecting the SATA and the power cable
ÊConnect the SATA and the power cable on the back of the optical drive.
224 | Maintenance Manual | RX900 S1 |
