Fujitsu RX900 S1 manual Sliding the server out of the rack, Removing the server

Basic procedures

4.4Sliding the server out of the rack

Trained personnel

VCAUTION!

●Use the anti-tilt plate to prevent the rack from tipping when installing the rack. Pulling the server out of the rack without having installed the anti-tilt plate may cause the rack to tip over.

●Be careful not to pinch fingers or clothes when sliding out the server or pushing it back. Failure to do so may cause injury.

●Follow the safety instructions in the chapter "Safety instructions" on page 31.

Figure 4: Removing the server

ÊLoosen the knurled screws (see circle).

42 Maintenance Manual RX900 S1