Fujitsu RX900 S1 manual Expansion card configuration table, Chipset, Bus scan order

Appendix

16.5Expansion card configuration table

Expansion cards require I/O space for Legacy Booting and for OS running. Due to the limitation of I/O space, see "Baseboard D3081, CPUMEMR D3131, PCIR D3082 for PRIMERGY RX900 S1 Technical Manual", the basic rules for installing expansion cards are:

1.Begin with the installation of the SAS and SAS RAID controllers in order of I/O space assignment order.

2.Continue with the installation of the expansion cards for LAN and FC into the PCIe slots.

Chipset				IOH#1			IOH#2
Bus scan order				3	2	1	5	6	4	7	8
I/O space assignment order within				1	2	3	4	3		2	1
the I/O Hub (IOH)
Hot-plug				n	n	n	n	n	n	n	n
Gen2 width				x8	x8	x8	x8	x8	x4	x8	x8
Slot #				1	2	8	3	4	5	6	7
Vendor	Type	PCIe	Max #
LSI	SAS 3Gb	Gen1x4	3	x	x		x	x		x	x
	Cougar2	Gen 2x8	1			x
	SAS	Gen 2x8	2	x	x		x	x		x	x
	RAID			(*1)	(*1)		(*1)	(*1)		(*1)	(*1)
	(WASAT)
Emulex	4G-FCx1	Gen 1x8	8	x	x		x	x		x	x
	4G-FCx2	Gen 1x8	8	x	x		x	x		x	x
	8G-FCx1	Gen 2x8	8	x	x		x	x		x	x
	8G-FCx2	Gen 2x8	8	x	x		x	x		x	x
	FCoE	Gen 2x8	8	x	x		x	x		x	x

Table 7: Expansion card installation recommendation I/O Hubs IOH#1 and IOH#2

364 Maintenance Manual RX900 S1