Processors
10.2.1 Required tools
●Starting and completing the task:
–key for the rack doors (if applicable)
–Phillips Ph2 screw driver
●Replacing the processor:
–Phillips Ph2 screw driver
10.2.2 Starting the task
ÊPerform the following procedures:
1."Opening the rack door" on page 40
2."Locate the faulty server" on page 37
3."Shutting down the server" on page 41
4."Sliding the server out of the rack" on page 42
5."Opening the server" on page 44
6."Removing the CPUMEMR" on page 190
RX900 S1 | Maintenance Manual | 207 |
