Fujitsu RX900 S1 manual Never remove parts of the CD/DVD drive casing

Safety instructions

VCAUTION!

●Only use CDs/DVDs that are in perfect condition in your server's CD/DVD drive, in order to prevent data loss, equipment damage and injury.

●Check each CD/DVD for damage, cracks, breakages etc. before inserting it in the drive.

Note that any additional labels applied may change the mechanical properties of a CD/DVD and cause imbalance.

Damaged and imbalanced CDs/DVDs can break at high drive speeds (data loss).

Under certain circumstances, sharp CD/DVD fragments can pierce the cover of the CD/DVD drive (equipment damage) and can fly out of the device (danger of injury, particularly to uncovered body parts such as the face or neck).

IYou can prevent mechanical damage and damage to the CD/DVD drive, as well as premature CD/DVD wear, by observing the following suggestions:

●Only insert CDs/DVDs in the drive when needed and remove them after use.

●Store the CDs/DVDs in suitable sleeves.

●Protect the CDs/DVDs from exposure to heat and direct sunlight.

ILaser information

The CD/DVD drive complies with IEC 60825-1 laser class 1.

VCAUTION!

The CD/DVD drive contains a light-emitting diode (LED), which under certain circumstances produces a laser beam stronger than laser class 1. Looking directly at this beam is dangerous.

Never remove parts of the CD/DVD drive casing!

RX900 S1 Maintenance Manual 35