Processors
10.1Installing a processor in a new CPUMEMR
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for integral server components. Ask you local Fujitsu service center for more detailed information.
VCAUTION!
Procedures indicated as "Authorized personnel only“ must be done by Fujitsu service personnel or technicians trained by Fujitsu for doing these tasks. Please note that unauthorized interference with the system will void the warranty and exempt the manufacturer from all liability.
A new CPUMEMR comes together with a heat sink. This procedure explains how to install a processor in a new CPUMEMR.
VCAUTION!
Only processors of the same type may be used in the server. That means the number of the internal processor cores as well as the primary clock and the FSB frequency have to be the same. For
10.1.1 Required tools
●Starting and completing the task:
–key for the rack doors (if applicable)
–Phillips Ph2 screw driver
●Installing the processor:
–Phillips Ph2 screw driver
200 | Maintenance Manual | RX900 S1 |
