222 Maintenance Manual RX900 S1
Optical and backup drives
VCAUTION!
●When forcing an accessible drive into a server, be careful so as not
to pinch the cable etc. connected to an accessible drive.
●Follow the safety instructions in the "Safety instructions" on page31.
11.1.1 Required tools
●Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
● Replacing the optical drive:
– Phillips Ph0 screw driver
11.1.2 Starting the task
ÊPerform the following procedures:
1. "Opening the rack door" on page40
2. "Shutting down the server" on page 41
3. "Sliding the server out of the rack" on page42
4. "Opening the server" on page 44