292 Maintenance Manual RX900 S1
Cables
15.1 Replacing the fan cables15.1.1 Required tools
●Starting and completing the task:
– key for the rack doors (if applicable)
– Phillips Ph2 screw driver
● Replacing the fan cable:
– Phillips Ph0 screw driver
– Phillips Ph2 screw driver
15.1.2 Starting the task
ÊPerform the following procedures:
1. "Opening the rack door" on page40
2. "Locate the faulty server" on page37
3. "Shutting down the server" on page 41
4. "Sliding the server out of the rack" on page42
5. "Opening the server" on page 44
Authorized personnel
Authorized specialist personnel can carry out replacement tasks for
integral server components. Ask you local Fujitsu service center for
more detailed information.
VCAUTION!
Procedures indicated as "Authorized personnel only“ must be
done by Fujitsu service personnel or technicians trained by
Fujitsu for doing these tasks. Please note that unauthorized
interference with the system will void the warranty and exempt the
manufacturer from all liability.