Baseboard

14.6.9 Inserting the baseboard

Figure 178: Inserting the baseboard

ÊCarefully lower the baseboard in the chassis by using the handle (1).

ÊSlide the baseboard in the direction of the arrow (2) until it is into place.

ÊFasten the captive screws (3).

VCAUTION!

After installing the new baseboard, it is necessary to update system specific data (e.g. BIOS, iRMC S2 firmware) to ensure proper operation (BIOS flash floppy disk, BIOS flash memory stick or iRMC flash memory stick, refer to the BIOS Manual for a detailed description).

IIf the customer owns a license key for Advanced Video Redirection and Remote Storage (iRMC2 Advanced Pack), the license key has to be loaded onto the iRMC S2 via the iRMC S2 web interface after replacing the baseboard. In addition, the iRMC S2 requires configuration. Please refer to the "ServerView Suite iRMC S2 - integrated Remote Management Controller" manual for a detailed description.

284

Maintenance Manual

RX900 S1

Page 284
Image 284
Fujitsu RX900 S1 manual Maintenance Manual