Expansion cards and BBU

8.6Replacing a hot-plug expansion card

Authorized personnel

Authorized specialist personnel can carry out replacement tasks for integral server components. Ask you local Fujitsu service center for more detailed information.

VCAUTION!

Procedures indicated as "Authorized personnel only“ must be done by Fujitsu service personnel or technicians trained by Fujitsu for doing these tasks. Please note that unauthorized interference with the system will void the warranty and exempt the manufacturer from all liability.

VCAUTION!

The actions described in this section may only be performed by personnel with the appropriate technical training. The device can be seriously damaged if it is opened without authorization or if repairs are attempted by untrained personnel.

Each slot in the server must have either an expansion card or:

Hot-plug PCIe slot: a dummy module, that is a retaining plate with an attached removal tool

Non-hot plug PCIe slot: a slot cover

Please observe the safety information in "Safety instructions" on page 31.

IOnly expansion cards of the same type and with the same settings may be exchanged. If the expansion cards do not match, the new expansion card will not be commissioned.

8.6.1Required tools

Starting and completing the task:

key for the rack doors (if applicable)

Phillips Ph2 screw driver

Replacing the expansion card: tool-less

RX900 S1

Maintenance Manual

139

Page 139
Image 139
Fujitsu RX900 S1 manual Replacing a hot-plug expansion card, Authorized personnel